PrintWant DTF Pigment DTF Ink Storage, Printing, Heat Press Production Process Parameters
Ink storage temperature: 5-35℃.
Ink storage humidity:40-85%.
Ink storage requirements: Ventilated and protected from light.
Printing environment temperature: 15-30℃.
Printing environment humidity: 50-80%.
Requirements before use: Shake the white ink several times, wait for the foam to disappear, and then add the ink cartridge. White ink is easy to settle, shaking can make the ink The water becomes even. Resting to reduce shaking. Shake the generated foam to prevent the air bubbles from Caused ink break.
Ink expiration date: 12 months. When the shelf life of the ink expires, the particle size of the ink will become larger due to the agglomeration of the particles, which will easily lead to ink clogging and ink breakage.
DTF printer back heating temperature: 30-40℃, use when the DTF pet film is damp.
DTF printer front heating temperature: 30-40℃, The temperature control should be adjusted according to the ambient temperature, and it should be used when the weather temperature is low and the ink is flowing.
Inlet heating plate temperature of shaking powder dryer: 70-80℃.
DTF powder shaker temperature: 130-150℃.
Heat pressing machine temperature: 160-170℃.
Pressing time: 10-25 seconds.
Requirements: After the ink is opened, it will be used up within one month.The actual temperature displayed by different devices is different from the specific temperature, so these temperature settings. It is related to equipment and environment.
PrintWant brings innovative DTF solutions to 2024 Printing United Expo
PrintWant will be present at the 2024 Fespa Eurasia exhibition, and will jointly write a new chapter of DTF technology
5 new production lines added in July to boost production capacity
Test report of cheap DTF film on the market: a double test of quality and integrity
